1. <ins id="u1brw"></ins>
    2. <wbr id="u1brw"></wbr>
    3.  
       歡迎訪問本官網

      全國服務熱線:

      15093617961

      專注測試設備,集研發、制造、銷售、服務為一體的專業設備公司

      十幾年來為上百家企業提升了產品價值

      over 10 years to upgrade the value of hundreds of enterprises

      產品展示

      products

      JSO30200電磁開關性能測試臺

      JSO30200電磁開關性能測試臺

      電磁開關的主行程

                     電磁開關的附加行程

                     電磁開關的吸合電壓、電流

                     電磁開關的保持電流

                     電磁開關的觸點壓降檢查

                     電磁開關的釋放電壓

                     線圈電阻測量

                     吸合線圈吸力曲線

                     保持線圈吸力曲線

                     彈簧力曲線


      0.00
      0.00
        

      電磁開關的主行程

                     電磁開關的附加行程

                     電磁開關的吸合電壓、電流

                     電磁開關的保持電流

                     電磁開關的觸點壓降檢查

                     電磁開關的釋放電壓

                     線圈電阻測量

                     吸合線圈吸力曲線

                     保持線圈吸力曲線

                     彈簧力曲線


      起動機開關性能試驗臺是參考國內、外有關產品的技術條件、要求和標準設計制造,檢驗起動機的電磁開關性能,用于出廠質量檢查。

      采用工控計算機進行數據采集、處理、存儲。能夠根據試驗標準對試驗結果進行自動判定,試驗的數據可以存儲和打印。自動控制試驗過程。

      起動機開關性能試驗臺試驗用模擬電源采用大功率開關電源技術,精度高、效率高,紋波小。

      起動機開關性能試驗臺做以下項目檢查
                     電磁開關的主行程

                     電磁開關的附加行程

                     電磁開關的吸合電壓、電流

                     電磁開關的保持電流

                     電磁開關的觸點壓降檢查

                     電磁開關的釋放電壓

                     線圈電阻測量

                     吸合線圈吸力曲線

                     保持線圈吸力曲線

                     彈簧力曲線

      • 自動夾緊接線,吸合時自動斷開串聯線圈,自動判斷合格與否,電磁開關的觸點閉合檢查。

      • 本試驗臺采用步進電機+滾珠絲桿伺服負載,可方便地進行設定和調整。

      • The Solenoid performance test equipment is designed and produced according to the referent technical conditions, requirements and the standards of the products both at home and abroad , whose puepose is to detect the starter switch performance,which mainly used in the factory quality inspection.

        It adopts the industrial computers to carry out the data acquisition, processing and storage.Then, according to the experimental standard,the device could do a judgement of the test result. Moreover, we can also have the data stored or printed. And the whole process is what we call automation.

        This device adopts the high-power switching power technology which is in high-precision, efficient and has small ripples.

        The Solenoid performance test equipment undertakes the projects of inspection as follows:

        Solenoid current 0-200 Amps, 0.5%

        Contact voltage drop 0-2.5 Volts, 0.5%

        tester output power 0-3.6 kW, 0.5%

        tester input power 0-4.8 kW, 0.5%

        Master travel of the solenoid switch

        Additional travel of the solenoid switch

        Pull-in voltage and current of the solenoid switch

        Hold-in current of the solenoid switch

        Contact voltage drop check of the solenoid switch

        Release voltage of the solenoid switch

        Coil resistence measurement

        The fixed distance suction test

        The Suction and coil- balanced test(which tests whether the coil cycles are the same as others)

        The switch or spring loss, misuse, or crooked detection

        Suction curve

        Spring press curve

        Automatic clamping connection, auto disconnect series coil when comes suction,auto judgement of those qualified products or not and also the solenoid contact closure inspection.

        This test bench adopts the stepper motor plus ball screw servo load which can be set and ajusted in great convenience.

      亚洲不卡av不卡一区二区_亚洲国产欧美国产综合在线一区_亚洲免费无码小视频_天天天操操操免费视频